Issue with memory

Novatech buy wow weapons 750W ATX "Silent" PSU

Here buy wow weapons is the situation:

I firstly had OCZ GOLD 2X2GB DDR3 1333MHZ ram, which worked fine for the 1st 3 or 4 days on 1333mhz (I had to change the voltage to get it to boot however)After 4 days or so I was rendering some video in Sony Vegas Platinum 9, and I got a BSOD, on rebooting my pc would not stay on for longer than 2 or 3 seconds without shutting downAfter some trial and error I found that it would only boot with 1 stick of the ram running at 800mhzIf I put the 1 ram chip up to 1333mhz it would reach windows start up and I would recieve a BSOD which varied in errorsIf I put both chips in it would not even stay on for longer than 2 seconds after powering onI suspected it was a compatibility issue and so swapped the ram for the Geil stuff. Exactly the same problem. . I ran the 6 most recent dumps and the bugchecks vary. One was 0x109 - critical structure corruption = kernel has detected critical kernel code or data corruptionI noticed in one of the WMI reports that you have 2GB RAM installed and that there was some heavy paging activity going on as virtual memory figures were near 500 MB. No RAM leftI am going to defer on the memory questions you asked to those that know much more than I about hardwareAt this point the BSODs do appear to be hardware relatedRegards. . jcgriff2.
More articles come from the:http://www.wowgoldpo.fr/guider